1. No Access to the Keyboard During the Boot Process?

Help, I can not get right of entry to my keyboard at boot!

If that is the case, I could advocate:

1-1. If using a USB keyboard, plug the keyboard into the number one USB ports at the return of the pc (on the motherboard). Then, restart the computer and try once more.Image result for What to Do If Your Computer Does Not Start

1-2. Try any other recognized operating USB keyboard plugged into the primary USB ports on the return of the pc (on a motherboard). Restart the computer and attempt again.

1-three. Try another acknowledged working PS/2 keyboard, restart the computer and attempt again.

1-four. If you use a PS/2 Keyboard, attempt changing your keyboard with a USB keyboard, restart the pc and attempt again.

1-5. If those steps fail, remove your keyboard connection and shut the computer off with the energy button. While a laptop is off, plug the keyboard back into the computer and begin the computer.

Still would not paintings? Please go to the “I need to flash my bios” section and proceed with flashing your bios.

2. Does Your Computer Freeze at Bios?

Why is my computer frozen?!

2-1. Remove all gadgets out of your pc, such as removable hard drives, extra USB gadgets, and printers and faxes. Then, restart the laptop and try once more. If no result, go to step 2-2.

2-2. If you may see your bios display screen, please tap the key to enter your bios settings. While internal of bios, make sure that your hard drive, reminiscence, and video card ( is relevant) are detected. If it is not, strive to re-seating or replacing the unit that isn’t being detected. If no result, visit steps 2-3.

2-three. While looking in bios and all of your hardware is getting detected k, please reset the bios lower back to its default settings and pick out “shop and stop.” The computer will restart, and also, you must be looking at the operating gadget loading web page at this factor. If no result, go to step 2-four.

2-four. Open the laptop, take away all but 1 memory module (commonly closest to the CPU) and disconnect all difficult drives. Also, disconnect and PCI or AGP upload on playing cards and begin your pc. If you spot “working machine not observed” or a similar message, progress has been made. Then start including 1 object again at a time, restarting the pc after every object to look whilst it fails.

If these steps nevertheless might not work, please proceed to the “I want to flash my bios” section.

3. Computer Beeping Noises on Power Up

No information on screen and laptop yelling at you?

Three-1. If your computer is beeping initially and you do not see whatever on your display screen. There is a hardware hassle along with your laptop. Please test your motherboard or computer producers’ website for bios code meanings. If this isn’t possible, the first issue to strive for is to put off all memory sticks besides, for one, restart your computer and try once more. If no result, please visit steps 3-2.

Three-2. If removed and examined all reminiscence, please disconnect all internal connections EXCEPT for Power supply connections, Video card connections, and the Power switch (PSW). , Then, leaving 1 stick of reminiscence, heatsinks and fans plugged in as nicely, restart the computer, and strive again. If no result, please go to steps 3-3.

3-3. If you have got a video card set up and have onboard video, please get rid of the video card and the energy connection to that card. Hook the video cable to your onboard video connection. Restart your pc and strive again. If no result, go to step 3-four.

Three-4. If the beeping still exists, Try changing the memory with an acknowledged running module. Then, restart the computer and try again; if no result, please update the motherboard and attempt once more. If nevertheless no result, go to step 3-5.

Three-5. If beeping nevertheless exists, update the processor and add only the essential connections ( Power supply connections, Video card connections, and the Power transfer (PSW). Also leaving 1 stick of reminiscence, heatsinks, and lovers plugged in as properly ). Then, start the pc and try once more.

Note: If all steps do now, not paintings, please overview the steps one extra time; if the laptop continues to be beeping at the beginning up, please touch a nearby pc restore technician.